10/100M Single Fiber Media Converter


Description

The single fiber media converter transforms the transmission media of Ethernet signal from CAT5 to optical fiber.It can extend the transmission distance to several kilometer or hundred kilometer.Using media converter is a economical solution to achieve long distance transmission base on current status.

Features

1.Built in a 2-port switch:
–Pass all packets without address and CRC check (optional);
–Supports modified cut-through frame forwarding for low latency;
–Supports pure converter mode data forwarding for extreme low latency;
–Supports flow control for full and halt duplex operation;
–Bandwidth control;
–Forward 1600 bytes packet for management;
–Optional forward fragments.
2. Supports 100Base-FX standard;
3.Built in 128Kb RAM for data buffer;
4.Supports auto MDI-MDIX function;
5. Supports link fault pass through function (LFP);
6. Supports for end fault function (optional);
7. LED display for link/activity, full/half, 10/100M
8. Support EEPROM configuration (optional);
9. the longest transmission distance reach 120 kilometers.

Specification

Parameter  Specifications
 Access mode 10/100Mbps
 Standard IEEE802.3 100Base-T Ethernet, IEEE802.3u,1000Base-TX/FX Fast Ethernet, IEEE802.3x Flow Control
 Wavelength 850nm/1310nm/1550nm
 Transmission distance Dual-fiber Multi-mode: 550m;

Dual-fiber single mode: 20/40/60/80/100/120 km;

Category-5 twisted pairs: 100m

 Port One RJ45 port:

Connecting STP/UTP category-5 twisted pairs, EIA568A/B

One optical port:

Multi-mode Dual-fiber: SC or ST (50/125μm or 62.5/125μm)

Single mode Dual-fiber: SC or FC (9/125μm)

 Conversion means Store and Forward mode or Cut-Through mode
 Buffer space Built in 128Kb RAM for data buffer
 Flow control Full duplex: flow control;

Half duplex: back pressure

 Error Rate <10-9
 MTBF 100,000 hours
 LED indicator  POER (power supply), FX LINK/ACT (optical link action)

FDX (full duplex), TX LINK/ACT (TP cable link/action)

TX 100 (TP cable rate 100M), FX100(fiber cable rate 100M)

 Power supply  External: AC90~264V/DC100~380V input, 5V1A output
 Power consumption  <40W (the chassis at full load), < 2W
 Operating temperature  -10~55ºC
 Operating humidity  5%~90%
 Maintaining temperature  -10~55ºC
 Maintaining humidity  5% ~ 90% non-condensing
 Dimensions  94mm (L)×71mm (W)×26mm (H) (external power supply)

Ask for Quote NOW!

Related Products